British Gas Wireless Receiver with Hive

[Marshall Chaloner Morris]

I have mislaid my Instruction leaflet for my WR1. The red alarm light in on
and the Drayton Motorised Valve is stuck in the Hot Water position. As a
result I have Hot Water but no heating. The Hive Thermostat is showing the
correct indications sand these are transmitted to the box fixed outside the
airing cupboard as shown by the appropriate green lights. The WR1 is inside
the airing cupboard and does not use batteries - it is mains connected. I
would like to get an instruction leaflet so I can try resetting the unit to
clear the red alarm light. I think I've done it once before but it was a long
time ago.

--
for full context, visit https://www.homeownershub.com/uk-diy/british-gas-wireless-receiver-with-hive-1424714-.htm

[newshound]

I have mislaid my Instruction leaflet for my WR1.  The red alarm light
in on
and the Drayton Motorised Valve is stuck in the Hot Water position.  As a
result I have Hot Water but no heating. The Hive Thermostat is showing the
correct indications sand these are transmitted to the  box fixed outside
the
airing cupboard as shown by the appropriate green lights.  The WR1 is
inside
the airing cupboard and does not use batteries - it is mains connected.  I
would like to get an instruction leaflet so I can try resetting the unit to
clear the red alarm light.  I think I've done it once before but it was
a long
time ago.

Have you actually tried googling direct for the manual? IME almost all
modern stuff has manuals online.

[ARW]

Post by newshound

I have mislaid my Instruction leaflet for my WR1.  The red alarm light
in on
and the Drayton Motorised Valve is stuck in the Hot Water position.  As a
result I have Hot Water but no heating. The Hive Thermostat is showing the
correct indications sand these are transmitted to the  box fixed
outside the
airing cupboard as shown by the appropriate green lights.  The WR1 is
inside
the airing cupboard and does not use batteries - it is mains
connected.  I
would like to get an instruction leaflet so I can try resetting the unit to
clear the red alarm light.  I think I've done it once before but it
was a long
time ago.

Have you actually tried googling direct for the manual? IME almost all
modern stuff has manuals online.

He is posting via the HomeOwnersHub.

So the chances are slim.

[Andy Bennet]

I have mislaid my Instruction leaflet for my WR1.  The red alarm light
in on
and the Drayton Motorised Valve is stuck in the Hot Water position.  As a
result I have Hot Water but no heating. The Hive Thermostat is showing the
correct indications sand these are transmitted to the  box fixed outside
the
airing cupboard as shown by the appropriate green lights.  The WR1 is
inside
the airing cupboard and does not use batteries - it is mains connected.  I
would like to get an instruction leaflet so I can try resetting the unit to
clear the red alarm light.  I think I've done it once before but it was
a long
time ago.

If you have a Hive system why have you got a WR1?
The Hive replaces it.

If the Hive was a retrofit then the WR1 reciever contacts should have
been shorted out or the box removed.